“Infinity Moon” Paper Cut

I really enjoy paper cutting as I find it relaxing.  This template is called “Infinity Moon” and it’s a Paper Panda design.  Took me about 3 hours to cut but I certainly did have a sore thumb afterwards 😉

Wolves under the moon


Having fun recycling previous glass fusing experiments

I watched some more great Microwave Kiln Glass Fusing YouTube videos yesterday.  One of these was really helpful in explaining how you can break up and reuse any of your previous glass fused creations that you were, well lets say less happy with!

Being a newbie to this craft I’d got a couple of these and because I already recycled some of my stained glass into my mosaics I’d already got the tool for job ahead.  So, out came the wheeled nippers (photo below in case you don’t know what these are), a large old plastic sandwich bag to stop the small shards of glass flying about the room and plenty of muscle power!  I then used the wheeled nippers to cut up the old fused pieces and was pleasantly surprised to reveal some lovely layered glass that I could reuse.

In the photo below you’ll see the glass stacks I made with the pieces I’d cut up and I also experimented with some glass on it’s side to see how the layers came out.  I was really happy with the results and they look so much better now than how they started out their life. My favourite one of them all is the tiny one in the middle right column as it reminds me of a ladybird 🙂

Our youngest son has been seeing me have fun so he asked to make one.  He chose the glass, the millefiori and orang stringer. His creation is shown below and is in the photo above of all todays pieces.  His piece we’ve called “bullseye”!

Fused Glass bullseye

Stained Glass fuses nicely, well most of the time!

I thought I’d do some more experimenting with the Microwave Kiln today.  I had a root through my stained glass and picked out quite a few bits of opal, rippled and transparent glass. I have read that Stained Glass can be troublesome to fuse so I stuck with the advice to only fuse 2 pieces from the same sheet. I made 3 stacks of 1″ squares that were 2 layers high.  I was pleased with the blue transparent (left photo) and the orangey opal but less pleased with the green rippled as that came out with a very matt finish.

More experimenting tomorrow 🙂

Busy day making two Single Stem Vases

I was pleased to sell my first single stem vase so I’ve had another busy day in the workshop and made two more but in different styles.  The one on the left is made from Lime wood and the one on the right from Spalted Silver Birch wood. All I need to do now is to seal them with resin so they can hold water.  The making of these will be posted on my YouTube channel in the next few days.
Made from Lime
Made from Spalted Silver Birch


More experiments!

The experiments continue!  I thought I’d take a before and after photo today so that I can see how the original stacked glass ended up.  What I like about this is that you just never know, until you lift the lid off the kiln once it’s cooled, as to what you’ll find underneath.  The bottom one of the two reminds me of a cats eye!
My firing schedule in my 800 watt microwave for these was;

  • 5 mins on medium, quick check to see everything is still in place etc
  • 5 mins on medium, quick check to see what stage it’s at, usually tacked together
  • Final 3 mins on medium.
  • Leave to cool in the microwave for 30 mins
  • Remove from microwave and let cool for a further 10 mins
  • Remove the lid of the kiln and leave to cool for at least another 15 mins

More fused glass pieces, this is an addiction!

The addiction and the experiments continue!

The left and middle photos are made from 3 squares of glass, one red, one blue, one white (but in different order for each stack which is why one is red and the other blue).  On top of the squares I put some confetti and a millifiore.

The one on the right is a pink rectangle on the bottom, topped with one black strip, one white strip and small red and blue squares down the middle.  First time I have ever had bubbles appear and from what I have read it may be due to one of the small squares being slightly taller than the rest of the pieces of glass so air was trapped when the sides fused first.  I keep learning and practising but all the time am having fun 🙂